Larry.... I have had the engine in & out of my Gremlin several times and it is never easy....the engine needs to be level and I find that it is easier to put the motor mounts on after you get the engine down in the engine bay....when I put the 401 in this last spring I left the valve covers off gives you a little more room against the firewall..also for me I find that it works best with the tranny (727) attached..other people do them seperate...but you do not have much room...with engine bolted in you have an inch or less between the engine and the firewall....it works best if you have a helper.. Jim --- In BaadAssGremlins@xxxxxxxxxxxxxxx, Dennis jr Sinks <dsinks@...> wrote: > > I ended up hacking 1/8th off the engine mount studs to get mine in. > I still ended up smacking the new paint on the firewall though :( > > Larry <chvyclss@...> wrote: > I have a problem with installing the eng/trans into a Gremlin that had > an original 6 cyc. I got a V8 front crossmember from John Rosa & > replaced the whole front suspension. After lowering the eng into the > bay the mounts don't line up & the heads are against the firewall. The > mounts are on the engine & about 1"-2" in front of the crossmember. Do > I need to keep moving the engine around to make it fit or did I install > it wrong? This is my first conversion & I'm stumped. Please help with > any advice. I am really looking forward to getting the Gremlin on the > road by Xmas. Thanks, Larry in Florida > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/