Re: [BaadAssGremlins] V8 conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] V8 conversion



Mine technicly wasnt a conversion, it is a factory v8 car but its a pain to shoehorn the v8 back into it.

Dennis jr Sinks <dsinks@xxxxxxxxxxx> wrote:
I ended up hacking 1/8th off the engine mount studs to get mine in.
I still ended up smacking the new paint on the firewall though :(

Larry <chvyclss@aol.com> wrote:
I have a problem with installing the eng/trans into a Gremlin that had
an original 6 cyc. I got a V8 front crossmember from John Rosa &
replaced the whole front suspension. After lowering the eng into the
bay the mounts don't line up & the heads are against the firewall. The
mounts are on the engine & about 1"-2" in front of the crossmember. Do
I need to keep moving the engine around to make it fit or did I install
it wrong? This is my first conversion & I'm stumped. Please help with
any advice. I am really looking forward to getting the Gremlin on the
road by Xmas. Thanks, Larry in Florida



__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated