Usually the castings were too thin for that. You would cut through the cylinder walls trying to bore it out that far. Todd On Thursday 19 April 2007 18:44, GrublinX@xxxxxxx wrote: > Thanks Bart! > If I follow this correctly, what would prevent someone from taking a 304, > ripping it down and boring and stroking it up to a 360? Charlie > > Charlie > > "Cool Factor X" Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/