Personal notes: Kennedy sent front wheel cylender rebuild kits, but bad news, one of the kits is wrong. Not even close. The news gets worse, I ordered 2 thru the glass gaskets for the reaar glass, they sent 2 small snippets of hose. Not even close. And both wheel cyl. up front are NOT REBUILDABLE. The pits are too deep and the alum. pistons are too degraded. I will need to buy 2 new wheel cyl. OR refigure the whole front brakes. Ordered the front coil spring bottom plate bushings, and I am waiting on my new coil spring compressor. I did manage to get the old non-tilt damaged steering column out, replacement arrived, with new keyswitch/keys and with tilt. Looks like the wiring is a lil different but nothing a lil time and a meter cant figure out. It wont be going in until its painted and detailed. As for the front end, looked up all the moog/trw part nos. for the rest of the front end, and online seems to be cheaper than local. I'm guessing it will be about 400 or less for ALL of the front end parts, including all rubber items. Thats all 4 balljoints, all tie rod ends, idler, pittman arm, end links, sway to frame bushings, upper and lower control arm bushings, shocks, strut rod bushings, etc.. now.. gotta find some $$ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/