Damn near! I live in Moscow.
 
Charlie "Cool Factor X"
In a message dated 9/19/2006 5:10:52 PM Eastern Daylight Time,
djdave@xxxxxxxxxxx writes:
Yes, I
am on East Mountain, south side of scranton.
So can I see your house
from here?
--- In BaadAssGremlins@yahoogroups.com,
GrublinX@... wrote:
>
>
>
> PROFERRA'S PIZZA!
> I am assuming you must be in the greater Scranton area!
>
Charlie in NE PA
>
> Charlie "Cool Factor X"
>
> In
a message dated 9/16/2006 2:53:25 PM Eastern Daylight Time,
>
djdave@... writes:
>
> Hello, people. It's been a long time. How
long?
> I was 17 when I bought my first (used) gremlin for $127.00 and 2
boxes
> of Proferra's pizza (had to be right from the pizza place, not
store
> bought) It was a 74 plain jane 6 cyl.
> When that car was
all but dust, I ended up buying a 73 levis with a
> 304. I bought a 75?
ambassador cause it had a 360/727, that
> eventually made its way into
the gremlin. That was about 18 years ago.
> Since then, I found myself
wanting another gremmie, and wanting to do
> all of the things to it
that i could not afford back then.
> I recently bought a 74 gremlinX
that was on ebay. It's a wreck. It
> needs ALOT of work, but the
>
uniframe/floorwellsuniframe/funiframe/floorwells<WBR>/quarters/<WBR>f
>
Pennsylvania, and found the car close to Fargo North Dakota. It is
>
truely a calif. car. all of the rust is surface rust only. Well woth
>
the 1500 mile trec (1 way) to pick it up.
> I am about to dive into
this car 100%. What I want to know, some of
> those things I want to do,
have they ever been done to a gremlin
before?
> I have been looking
high and low but cannot find a gremlin with shaved
> doorhandles and
locks, or power windows. Nor have I seen any
> substituted interiors.
Iwas thinking of using a dash, console, seats,
> and column from a
2001-2003 PT Cruiser.
> I am also looking for a 401 to put in the
gremlin, it need not be in
> good shape, as I plan on (re)building the
motor myself.
> I also need a drivers side door. The one on the car is
caved in
> pretty good. I could fix it, but it will need alot of
attention.
> Also, is there a patch panel available for the door nader
pin area?
> was thinking I am going to ned to mig a piece of stock from
the
inside.
>
> djdaveinpa
|
Back to the Home of the AMC Gremlin