Re: [BaadAssGremlins] getting crap for swapping to V8

I just sold my 77 AMX to a guy in Novi, Michigan. just delivered it to him. Everyone gathered around the car. No one had ever seen one before....eddie walker

CJ <redneck2212@xxxxxxxxx> wrote:

Eddie, AMC parts here in MI are few and far between area scrap yards have no gremlins. The only parts are from concords and jeeps. Do you have the emails for your MI vendors? Even in Toledo Ohio which is not to far from where I live crunched all there gremlins. Thanks, I appreciate it. C.J.

Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx> wrote:

CJ it depends on where you look. Granted everything has dried up consideraby in recent memory, however if you are not a member of any of the several MI chapters; most times these fellow can easily point you in right direction, so it pays to get involved. You could also contact some of my MI vendors list Stu Ehrhardt, or Jeff Bristow and they can hook you up, ro point you in right direction. But it will depend on getting involved,a nd talking to some of the folks in your region. You would be surprised the stuff still out there.

On the SUAD file on my site it talks about how to flush shit out of woodwork by running ads. Michigan had some of the highest volume of AMC sales in the US and there is still more stuff there than some other states where you could not give away a AMC like AR, MT, UT to name a few. But you place a wanted ad like I have listed there on the SUAD file and I guarantee you will have AMCs, 401s, 360s coming out your butt with so many calls from people wishing to sell, and all price ranges too.

How well does it work? I have never spent over $2000 for any of the 320 AMCs I have owned. So try it, and if you do, let us know of the results!

Eddie Stakes'
Planet Houston AMX
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
*email is currently HEAVY
Call if important*
www.planethoustonamx.com

----- Original Message -----

From: CJ

To: BaadAssGremlins@xxxxxxxxxxxxxxx

Sent: Thursday, June 15, 2006 8:12 AM

Subject: Re: [BaadAssGremlins] getting crap for swapping to V8

Im live in Michigan and AMC parts are about impossible to find.

eddie walker <moparedwalker@xxxxxxxxx> wrote:

Mopar 360's can be built to make 400 hp. very cheaply but finding a 727 to mate up to a small block is costly. Mopar guys scarf them up so I wouldnt say no one wants those. Eddie is right about the 318's. Unless you have mopar engines and trannies sitting around, I would stay away from a mopar engine. Way too expensive to build a 318 to make good power and big blocks would cost more to build than a 401.I have alot of mopar engines sitting in the shed but I am going to put a 401 in my AMC's. just my 2 cents....eddie walker

Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx> wrote:

Not sure what this thread is about as have not been following it, but if anyone here needs schematics of vacuum lines, most shop manuals have them in back, and illustrated. If I have that shop manual will be glad to send you photos of that page. Vacuum lines you might want to check with your state emissions as removing them, even if shit lines, you will fail emissions test. Some states like here in Texas, cars 24 years or older are exempt, so the first things to go are smog pumps, vac lines and other emissions crap that has long since outlived its usefulness, and amaginly the car usually runs great afterwards. As for 318s, you can find them fr pennies on dollars at local pick a part yards, tons of the things no one wants them, also mopar 360s. As for 401s, I believe Jock on the amc-list amxfiles just posted a ad for someone who has 5 401s for sale for $500 each, you will have to go back a day or two in the posts to find it.

Eddie Stakes'
Planet Houston AMX
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
*email is currently HEAVY
Call if important*
www.planethoustonamx.com

----- Original Message -----

From: twa1950@xxxxxxxxx

To: BaadAssGremlins@xxxxxxxxxxxxxxx

Sent: Wednesday, June 14, 2006 8:12 PM

Subject: Re: [BaadAssGremlins] getting crap for swapping to V8

if you have taken all the polution control off the car you only need one going to the spark advance. I can't think of another one that has to be on there. ok help be out here

baadass73gremlin@xxxxxxx wrote:

In a message dated 6/14/2006 7:37:10 P.M. Eastern Standard Time, redneck2212@xxxxxxxxx writes:

On a V8 Mopar engine there is a heck of a lot less vacuum lines.

WTF??compared to what engine? a inline AMC a V8 AMC?and vacuum lines is the reason why you want to go through hell swapping engines?

Bart

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Technology, sufficently advanced, would be indistinguishable
from magic.
Redneck from birth. Rebel by choice.
CJ
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Technology, sufficently advanced, would be indistinguishable
from magic.
Redneck from birth. Rebel by choice.
CJ
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

`Spirit`	`Automotive maintenance`	`Automotive radiators`
`Carnival spirit`	`Spirit phone system`	`Spirit medium`