We had a similar problem on my son's 360 in his Matador. Edelbrock makes wood spacers to put between the carb and manifold. Worked wonders on his car. They're about an inch thick, and wood makes a great insulator. Todd On Sunday 07 May 2006 19:49, crbacsw@xxxxxxx wrote: > Greetings to all! > I tried to post this question yesterday but it never made it - so here > goes again. > I have a 75 Gremlin w/304 - 40K, Hedman headers, Edelbrock manifold and > carb. No internal engine work. > Starts cold no problem. Starts hot no problem if I do so within 5 to 10 > minutes after shutting it down. However, if I let it sit 30 minutes or so, > she is very hard starting. Edelbrock tech suggested a "percolation" > problem. So, I put a heat sink gasket between the carb and manifold. This > did nothing to solve the problem. Anyone ever experience this before? I > sure could use some help! > Thanks, Charlie ------------------------ Yahoo! Groups Sponsor --------------------~--> Home is just a click away. Make Yahoo! your home page now. http://us.click.yahoo.com/DHchtC/3FxNAA/yQLSAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/