Re: [BaadAssGremlins] Sick Gremlin - "gastric" problem?

[Dennis jr Sinks <dsinks@xxxxxxxxxxx>]

How is your fuel ran to the carb.   Is it sheilded pretty good from the headers?

I had that same issue with My cj5 a few years back with the exact same setup.

 

I had to re-route my lines and wrap them with header wrap.   It fixed it but I couldnt tell ya why it worked fine for 2 years before though....

crbacsw@xxxxxxx wrote:

Greetings to all!

I tried to post this question yesterday but it never made it - so here goes again.

I have a 75 Gremlin w/304 - 40K, Hedman headers, Edelbrock manifold and carb. No internal engine work.

Starts cold no problem. Starts hot no problem if I do so within 5 to 10 minutes after shutting it down. However, if I let it sit 30 minutes or so, she is very hard starting. Edelbrock tech suggested a "percolation" problem. So, I put a heat sink gasket between the carb and manifold. This did nothing to solve the problem. Anyone ever experience this before? I sure could use some help!

Thanks, Charlie

SPONSORED LINKS

Automotive maintenance

Automotive radiators

---

YAHOO! GROUPS LINKS

•  Visit your group "BaadAssGremlins" on the web.
   
•  To unsubscribe from this group, send an email to:
   BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---