Re: [BaadAssGremlins] Re: Gremlin rear and Javelin rear
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: Gremlin rear and Javelin rear



64-70 mustang and lincoln Vesallis also bolt in and are same width.
 Davis

jgray_55 <jgray_55@xxxxxxxxx> wrote:
HEY SCOTT. Are you going to build up a V8..or is it a mosyly stock
V8??? If you want a "bolt-in" HD unit...Find a 57-59 FORD passenger
car..NOT wagon/Ranchero.The factory 9" will bolt right in..with only
SLIGHT slotting of spring pads..or just pushing on the springs
slightly with your foot!!..Then use a narrow pickup truck yoke on the
gearset..WAAAALAAAA..even my stock 904 driveshaft bolted right up!!
EASY as heck!! Hope this helps....Joe--- In
BaadAssGremlins@xxxxxxxxxxxxxxx, "blue77gremlin"
wrote:
>
> Hey guys how is it going? Have not posted in a while. I was
wondering
> if a 74 Jav rear end will fit in a Gremlin or is it wider? I found a
> 74 Jav cheap and there is not much left of it anymore. Pretty well
> stripped out.
> Thanks
> Scott
>








Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/






YAHOO! GROUPS LINKS






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated