[BaadAssGremlins] Attaching Fiberglass Hoods To Stock Metal Hood Frames

[AMC74HORNET@xxxxxxxxx]

Isn't the Javelin AMX cowl hood fiberglass on a stock metal hood frame?
I believe it was glued on. There are lots of modern cars with plastic
panels that are glued on. I don't see why with one of the modern
adhesives made today you could not glue one of Davis's glass hoods to a
stock Gremlin metal frame. The only concern I would have is with the air
the scoup would pick up at highway speeds and possibly cause the glue to
fail. A simple cure is to have 2 hood pins in the front of the hood for
added safety. Also most states have a limit on the height the scope can
be.     
"Doc"



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/