 
Re: [BaadAssGremlins] My Gremlin
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [BaadAssGremlins] My Gremlin
- From: Paul Hancock <kwikbiker@xxxxxxxxx>
- Date: Sun, 26 Feb 2006 09:10:00 -0800 (PST)
 Thanks for the tip on the fabric DOC. The strangest thing happened yesterday after posting my gremlin.  I went to ebay to look at something and the 1st thing up was a parts car. It is about 40 milles from my house in good shape and complete. Rear bumper looks great, allthough I don't know if a 78 rear will fit a 74 car. I'm going to look at it tomorrow and keep close eye on the auction or make offer for the parts I need. Also Doc The brackets are gone from the belts. In 74 they unhooked at the clasp so you could use only the lap belt if you wanted and they must be able to get them off that way. I had to admit I did do a big DOH when I read your email though  Paul
AMC74HORNET@xxxxxxxxx wrote:  Paul I got the original seat insert material from SMS. They were very
helpful and sent me a sample before I ordered the material. The one
thing
 I did do though was not to have them electrically heat the
material to make the pleat seams in the material like it was from the
factory as that is where I found it splits after only a few years. My
upholstery shop sewed the material to duplicate the factory pleats. The
back of the rear seat is original factory but the base is all new and
you can't tell the difference. This guy is a real craftsman. There is no
reason you cannot polish the stainless on the car. Use the same method I
outlined on the sill plate polishing in the damaged areas. If there is
no damage I use Mothers Aluminum & Mag Wheel polish on stainless. On
your seat belt pillar mounting problem there is a triangle bracket that
the seat belt passes through with a hole in it that bolts to the pillar.
It is not removable from the seat belt so it must be there. It bolts to
the pillar with  bolt similar to the ones that mount the seat belt to
the floor. The stepped torques
 headed bolt allows the triangle bracket
to pivot. There is a triangular plastic cover that snaps over it. An AMC
vender wanted 20$ a piece for the 2 of them NOS. I got mine free from
the Gremlin my friend parted out. He also wanted 8$ a piece for the
plastic bushing on the inside door locking rod, that I had to buy. :-(
"Doc"
To: BaadAssGremlins@xxxxxxxxxxxxxxx
From: "Paul Hancock" <kwikbiker@xxxxxxxxx>
Date: Sat, 25 Feb 2006 18:07:35 -0000
Subject: [BaadAssGremlins] My Gremlin
I thought I'd post a small update on my 74 Gremlin. Been stashing 
parts all winter. some include nos door handles, nos rear latch 
handle, real nice radio surround,  Carpet, dash pad, nos dome lens, 
matching seat material from sms, armrests, nice front bumper, , nice 
tail lights, gas caps from Hal, and yesterday I received a nos 
grille from a dealer in Co. The grille looks kinda crappy as it's 
been sittin on a shelf since the 80's.It's in one piece but the one 
on my car actually looks beter. Ive rebuilt the brakes front and 
rear,new master cyl. cleaned the gas tank
 and new sending unit,  
fixed the heater blower, Cleaned the s&#* out of the engine 
compartment. I can't do paint this year but luckilly it has newer 
paint thats a good 10 footer. Had a new exhaust system put on Thurs, 
all custom bent by a local shop for 160.00, from the manifold 
back.Fixed the horn and then replaced it with a nice REALLY LOUD set 
of air horns. Can't wait for those NUNS to cross the street in front 
of me.  I'm still lookin at those scuff plates and haven't found a 
rear bumper (thought I had one). I noticed today that I'm missing 
some kind of bracket that holds the seat belt up on the pillar on 
both sides. Have no idea what it looks like and can't find part #.  
Oh ya I also replaced water pump and starter. Thanks to DOCs email 
I'll be trouble shootin the windshield washer today. Still have to 
polish some stainless, can I do that on the car?. so, there ya go 
I'm going to try and post pictures
 before I start on cosmetics so 
you all can see the orig condition.  I wasn't lookin for a car, but 
I was standing in a field on a bike run and the guy pulled right in 
front of me with a for sale sign on it. Kinda weird! I took one look 
and said , I'll take it. It's just like the one we had when I was  
kid. If anyone can help with my issues I would appreciate it. Thanks 
Paul in Det.
		
 Yahoo! Mail
 
Use Photomail to share photos without annoying attachments.
    
  
  
    SPONSORED LINKS
  
       
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of the AMC Gremlin
 Back to the Home of the AMC Gremlin