What a paint to clean and prep these after market turbine wheels. They have 30 ribs in them. I found out they are clear coated and the only thing that will remove the grime on then is enamel reducer. You have to be very careful not to use to much so you don't remove the clear coat. I finally got the two rear wheels clean and will have to scuff the area between the ribs and mask the ribs and prime them with self etching primer and then paint them orange. There was also casting flash on the wheels I had to knock down with a file between each rib. The knock off centers are done and just out of the dehydrator after baking the clear over nite. "Doc" ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/