First off i want to say I already posted on the Amcforums site. Please dont hate me. :( I guess they asume Im trying to build a full drag race engine. My imidiate goal is make it a decent daily driver and a weekend racer if at all possible So here I am, Shouldve asked here fist I know. But Im at a loss, My remanned 401 turned out to be 8.5CR and now it seems my Cam isnt worth a crap in it. The engine was a running stocker and I tore it down enough to put a (Recommended cam into it) That was before I found out it was 8.5. The cams summits Biggin for the Amc v8. So what the heck do I do now? I cant afford to do what it takes to get the cr up to 9.5 or higher. Plus I want to run pump gas. I just need advice and some positive renforcment :) Heres what I got and Im stuck with because of money issues. Stock 401 with 8.5 Torker intake Performer Intake 600 edelbrock carb and edelbrock 750. Summits big cam or #8601 I think Hedmann headers and exhaust is up in the air. What should I do to make this a runner in its as is state? Any suggestions? ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/