[BaadAssGremlins] Re: 77 hornet steering knuckle

["Dan M." <vegadan@xxxxxxxxx>]

Davis,

According to my Chilton's manual, the steering knuckle pin is the 
part that attaches to the upper and lower control arms via the upper 
and lower ball joints.  The spindle bolts to the outside of the 
knuckle pin, and the steering arm bolts to the inside.  The outer 
tie rod ball joint attaches to the steering arm.  It is the steering 
knuckle pin and steering arm that I need for the driver's side of my 
77 hornet (with power steering), and are the pieces I am asking if 
they interchange with other cars.  I hope this helps-sorry for any 
confusion.

Thanks,
Dan

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-
davis@xxxx> wrote:
> Dan,
>  What parts exactally are you talking about? Pitman arm? or the 
steering shaft coupler? Tie      rods?
>  Davis 
> 
> 
> Can anybody tell me if the steering knuckles/arms from other amc 
cars 
> will work? I asssume a gremlin's will work, but what about a 
javelin, 
> matador,etc.?
> 
> Thanks,
> Dan
> 
> --- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Dan M." wrote:
> > I need the driver's side steering knuckle and steering arm for a 
77 
> > amx with front disk brakes. Please let me know the total cost 
with 
> > shipping to the 60188 zip code. 
> > 
> > Thanks, 
> > Dan
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/