After many measurements, I have determined that the 904 transmission crossmember will work as well as the mount. Thanks! --- In BaadAssGremlins@xxxxxxxxxxxxxxx, baadass73gremlin@xxxx wrote: > > In a message dated 6/22/05 6:25:56 A.M. Eastern Daylight Time, > martin-davis@xxxx writes: > > Lu, > The crossmember will work but you will have to get a new mount for a 727 out > of a matador. The 232 had a 904 behind it. > Davis > > > > Davis,the mounts are the same in both the 727 and 904 i bolted my 727 on my > 904's trand mount with no probs > Bart Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/