Re: [BaadAssGremlins] Alt bracket

[AMC74HORNET@xxxxxxxxx]

No rush on the parts Hal. Does your Gremlin have power steering. It
might be hard to mount the Alt. on the pass side. 6 cyl cars do have a
clearance problem with a Deco on the steering box but it is doable, and
easier on a car without P/S. I worked all this out last fall when I did
this on my orange Hornet with P/S. Swapping the smaller diameter
Motorola fan for the Delco and modifying the upper alt bracket for fan
clearance and it bolts right in. Of course you have to shim the Delco
for proper pulley alignment and drill out the Motorola fan to the Delco
shaft size but other than that it is a piece of cake once you know what
you are doing. You also need a 3/4" shorter alt. belt. Dayco no# 15360.
And it has to be a Dayco. The first time I did it it was a nightmare but
now that I know what I have to do it should be a piece of cake next
time.   
"Doc"










.



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

--- Begin Message ---

• From: "HEL" <strlcuckoo_46@xxxxxxxxx>
• Date: Sun, 27 Mar 2005 10:52:31 -0000

I want to go with a single wire/internal regulator altenator in my
70/199 Gremlin and would like to switch it from drivers side to
passenger side for clearance with steering box. Does anyone have a
passenger side bracket that would fit?
Doc, I gues I am going to have to split a couple of those bumper nuts
to get it off. But I will get those pieces and the chrome to you.
                               Hal






--- End Message ---