It also helps to stop drill the cracks before using the Plastic Welding system and back up your repair with somthing. I use sheet model plastic or you could use JB Weld. "Doc" ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
--- Begin Message ---
- From: Plumpy72@xxxxxxx
- Date: Fri, 4 Feb 2005 17:03:04 EST
BillRepairing the plastic is easier than you may think. Go to a local auto parts store and get a plastic weld kit. The brand I use is distributed by VersaChem and is called PLASTIC WELDING SYSTEM. It is a two part epoxy type mix and it works wonders. Be sure to prep the area really good. Use sand paper or a small file on the cracks to give them some depth and a little "bite". Apply the plastic weld and let it cure. Once its hardened, it can be sanded smooth and painted.Take your time and good luck.Rick
--- End Message ---