Re: new pics
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: new pics



--- In BaadAssGremlins@xxxxxxxxxxxxxxx, themixtoo@xxxx wrote:
> In a message dated 5/12/2004 6:21:42 AM Eastern Daylight Time, AMC74HORNET@xxxx writes:
> 
> > 
> > 
> > --- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-davis@xxxx> wrote:
> > > Doc,
> > > Thanks. As far as the thermostat.......I haven't gotten that hi tech yet. It is just on an on and off switch for now. I just hope it cools on those 90 degree days.
> > > Davis
> > >
> > > amc74hornet <AMC74HORNET@xxxx> wrote:
> > > --- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Davis" <martin-davis@xxxx> wrote:
> > > > I posted a pic of my dual fan setup and a pic of my Moroso water
> > > > pump drive. Bart you can delete them later if you want. I think
> > > > someone asked to see the pics.
> > > > Davis
> > >
> > > That was me "Doc" who asked to see the pic's. Nice setup on the fans. I'd like to go with an auxillary fan set up on my new Hornet daily driver but with the 6 cyl engines extra length behind the radiator and the A/C condencer in front I have no room. Nice clean set up on the elect. water pump conversion. Do you have a thermostat to operate the fans?
> > > "Doc"
> > >
> > >
> Davis, I came across a t-stat housing with a 3/8" theaded port in it (used on later V-8's for emission control) and installed a NAPA normaly open temp sensor (closes @ 180'), works perfect. I also set it up so I can bypass it and operate it manually with a switch on the dash. I'll have Doc take a pic of it(got no digital camera yet)this weekend. And NO, I haven't forgotten the other RU parts, been real busy here. 'The Mix'

The new cast iron thermostat houseing I bought for my son's 72 360 Javelin had a flange cast into the houseing that could be easily drilled and tapped to take a sensor to control the fans. I wish I had room on my orange Hornet for a auxillary electric fan set up.
"Doc" 





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated