Re: [BaadAssGremlins] Fw: Gremlin/Bricklin Brake Proportioning valve

[Davis Martin <martin-davis@xxxx>]

Josh should have one in the gremlin he is parting out.

 Davis

Eddie Stakes <eddiestakes@xxxx> wrote:

> Hey everyone, feel free to chime in here, if you think you can help out one
> way or another. I have already emailed him directly and gave him some names
> to call but thought possibly one of you can help out, thanks in advance to
> all who might reply, info provided below.
> Eddie Stakes
> www.planethoustonamx.com
> ============================
> ----- Original Message ----- 
> From: "Dennis Kronberg" <dkronberg@xxxx>
> To: <eddiestakes@xxxx>
> Sent: Wednesday, April 14, 2004 8:46 AM
> Subject: Brake Proportioning valve
>
>
> > Hi Eddie,
> >
> > Hopefully you can help me out.  I have a 1974 Bricklin and I need a brake
> > proportioning valve.  I replaced ALL parts of my brake system right down
> to
> > the lines with the exception of this valve as I could not locate a
> > replacement at any local
> auto stores and of course as luck would have it,
> > the valve is bad.  As you were recommended on the Bricklin club website
> for
> > hard to find AMC parts, I figured it couldn't hurt to contact you.   The
> OEM
> > number for the part is AMC 321-1628.  It's possible that it was the same
> > part used in the 73-74 Gremilins as many of the other brake componants
> came
> > from that.  If you have any cross reference information for this part or
> any
> > ideas of where to find one, please contact me.  I can be reached at the
> > toll-free number below or you can contact me back via e-mail.  This is my
> > work number and e-mail and I will be here 8-5 CST (6-3 your time).
> >
> > Dennis Kronberg
> > nistevo
> > dkronberg@xxxx
> > 888-787-4482
> > 952-294-1902 fax
> >
> >
> >