Fw: Gremlin/Bricklin Brake Proportioning valve

["Eddie Stakes" <eddiestakes@xxxx>]

Hey everyone, feel free to chime in here, if you think you can help out one
way or another. I have already emailed him directly and gave him some names
to call but thought possibly one of you can help out, thanks in advance to
all who might reply, info provided below.
Eddie Stakes
www.planethoustonamx.com
============================
----- Original Message ----- 
From: "Dennis Kronberg" <dkronberg@xxxx>
To: <eddiestakes@xxxx>
Sent: Wednesday, April 14, 2004 8:46 AM
Subject: Brake Proportioning valve


> Hi Eddie,
>
> Hopefully you can help me out. I have a 1974 Bricklin and I need a brake
> proportioning valve. I replaced ALL parts of my brake system right down
to
> the lines with the exception of this valve as I could not locate a
> replacement at any local auto stores and of course as luck would have it,
> the valve is bad. As you were recommended on the Bricklin club website
for
> hard to find AMC parts, I figured it couldn't hurt to contact you. The
OEM
> number for the part is AMC 321-1628. It's possible that it was the same
> part used in the 73-74 Gremilins as many of the other brake componants
came
> from that. If you have any cross reference information for this part or
any
> ideas of where to find one, please contact me. I can be reached at the
> toll-free number below or you can contact me back via e-mail. This is my
> work number and e-mail and I will be here 8-5 CST (6-3 your time).
>
> Dennis Kronberg
> nistevo
> dkronberg@xxxx
> 888-787-4482
> 952-294-1902 fax
>
>
>