Re: did you see my car?/Dash Wireing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: did you see my car?/Dash Wireing



--- In BaadAssGremlins@xxxxxxxxxxxxxxx, linda sufficool <greenhornetlady@xxxx> wrote:
> 
> 
> amc74hornet <amc74hornet@xxxx> wrote:--- In BaadAssGremlins@xxxxxxxxxxxxxxx, linda sufficool <greenhornetlady@xxxx> wrote:
> > 
> > 
> > badass73gremlin@xxxx wrote:
> > From: "greenhornetlady" <greenhornetlady@xxxx>
> > Date: 2004/02/28 Sat PM 04:21:21 EST
> > To: BaadAssGremlins@xxxxxxxxxxxxxxx
> > Subject: [BaadAssGremlins] did you see my car?
> > 
> > Welcome Green Hornet Lady i'm sorry your Waggy got smacked but i see your transfering the good parts into another Hornet waggy what year is that one?
> > regards
> > Bart Mangrum
> > 73 Gremlin 360/T10
> > Moderator'BaadAssGremlins'
> > 
> > 
> > ---------------------------------
> > Yahoo! Groups Links
> > 
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/BaadAssGremlins/
> > 
> > To unsubscribe from this group, send an email to:
> > BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
> > 
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
> > 
> > Hi everyone! Im Linda and Ive been looking for parts for my poor car. 
> > I have posted the pictures of it. No, I did not load the pictures the 
> > wrong way. My car WAS pretty, and then it got hit..boohoo. If you 
> > have any parts that fit the 70-72 sportabout, pleade let me know.
> > Later, Linda
> > 
> > 
> > 
> > The donor is a 75. I didnt realize the wiring problems I would have switching the dash over. All the wiring harness and conecters are the same to conect and they looked identical, but the guages wont work unless I have the running lights on..I dont know how to fix that. Do you have any ideas? I want to get that huge bumper off the rear and put a slim one like the one on the 72, but the trouble is finding one close that I can afford to pick up. Also puting the aluminum trim around where the gas cap should be.. I might just wait and find another 72 body.hahaha, thats a good one. Ive been looking for one of those for almost three years now. Let me know if you know how to fix my dash dilema or if there is a book or something. I handle all the mechanics myself, I mean Ive done it myself untill now , and how much harder can these cars get, right? Well, Ill talk at ya latr
> > 
> > ---------------------------------
> > Do you Yahoo!?
> > Get better spam protection with Yahoo! Mail 
> 
> I am assumeing that you put the whole 72 dash gauges and all in the 75 right? If so try putting the 75 gauges that were in the 75 back in the 72 dash in the 75. If they then work properly you know that was the problem. If they still don't work then you have a wireing problem somewhere. Now that I have totally confused you and myself i'll just shut up. 
> "Doc" 
> 
> 
> Yahoo! Groups SponsorADVERTISEMENT
> Click Here
> 
> ---------------------------------
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/BaadAssGremlins/
> 
> To unsubscribe from this group, send an email to:
> BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
> 
> 
> Yeah, I put the whole dash, just pulled it out and transfered it over. That sounds like it would work. Not looking forward to that though. It initially took me 5 hours to take out the first dash, then only took me 1 hour to put it in after I knew where it all hooked up. That was more than 2 years ago,its like riding a bike, right? Thanks, ill give that a try in a few months..thanks , linda
> 
> ---------------------------------
> Do you Yahoo!?
> Get better spam protection with Yahoo! Mail

The inst. panel comes out with 5 screws, you don't have to remove the whole dash. The hardest part is reaching up under the dash with the package tray removed to disconect the speedo cable. The gauge panel should just pop out and then disconect the wireing plugs and it is in your hand, 15 min. tops. 4 screws to remove to swap the gauge cluster and re-install. I know all this from experience as I rebuilt the dash in my other Hornet 3-4 years ago and am building a complete new one from used parts for the new Hornet right now. 
"Doc" 






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated