Re: [BaadAssGremlins] Re: Drive Pulley Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: Drive Pulley Removal



If it is the Damper, it is the wheel that is attached to the front of the crank shaft behind the bottom pully. When you go to get a puller for it it's called a harmonic balancer puller.
 let us know how you make out.
 Davis

amc74hornet <amc74hornet@xxxx> wrote:
--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "lumina333" <lumina3@xxxx> wrote:
> Okay, I spent some time today taking the rocker arms off and pulling
> the push rods out....still no luck turning the crank shaft. But after
> all, tomorrow is another day!
>
> Question: How do I remove the drive pulley (off the 360)? I need to
> take it off so I can remove the A/C condensor (bolt won't clear the
> pulley). Thanks for any help, Luinda.

Are you talking about the crankshaft dampner? If so you need a puller for it. It is similar to a steering wheel puller but bigger.
"Doc"



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated