Re: [BaadAssGremlins] Whats the chances of these disc brakes fitting my Gremlin?

[Davis Martin <martin-davis@xxxx>]

If your gonna do the conversion you will need to get everything off from the donnor car. unbolt the 4 bolts that attach the spindle and take everything attached to it, caliper mount, caliper,brake hose, dust shield, the bolts, spindle, the hub, the mastercylinder, booster, and proportioning valve.

 Grem

deezildennis <dsinks@xxxx> wrote:

> I seen a late 70's early 80's concord in the the yard the other day. 
> Its drivetrain and brakes where still intact.  In fact I jacked up a 
> wheel and spun it and slammed on the brakes and they still worked.
>
> I realize they will have to gone through to make sure all is good. 
> but everything looked spiffy, even the brake hoses.
>
> They where power brakes though.
>
> So if they do work, should I pull the booster and convert my 74? ir 
> should I just get the brake hardware and a new non power master cyl?
>
> I know I also need the porportioning valve but will it work if i 
> decide to keep it manual?
>
> What should I do? Get it all and convert?  I pressume I need the disc 
> spindles as well?  Tell me what I need to get. Show me your ways!!!
>
>
> O and Thanks for your help.