--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Eddie Stakes" <eddiestakes@xxxx> wrote: > Sure Doc, here is a Gremlin X dash. Note factory Rally Gauges on the bottom, > Oil and Amp. Have found several of these thru the years in cars in salvage, > Stewart Warner gauges. Probably have a few of them in stock although would > not use them on anything due to age. But this is a three hole Gremlin dash > setup. Again, for those of you who like this setup, the dimensions ARE THE > SAME if you presently have a 'two hole' setup. The plug on back is the same. > Best of all, if you do use one like this in your Gremlin, you do not have to > drill or cut anything, all you have to do is add either a factory > tachometer, or a factory clock. > Eddie Stakes' Planet Houston AMX > www.planethoustonamx.com > > Doc asked: > > Hey Eddie you got a pic. of a Gremlin dash with the clock in it to show > us? > > "Doc" Thanks for the pic. Eddie. I looks just like a 3 hole Hornet panel. All the Hornets I have ever seen have the 3 hole gauge panel and a block off plate for the tac/clock hole if not so equipt. "Doc"