I swear, I was patient. 60 degrees out, the garage door open, and sun coming in, I was patient, trying to get the valve cover out. No amount of wiggling would get the valve cover off. The lip of the firewall, just beneath the wiper motor, was preventing it from coming out. I didn't want to have to lower the back of the engine, so I got out a dremel tool and cut a 1/2 inch notch about 2 inches wide to get clearance. Sanded down and painted, it doesn't look bad. What does look bad is the huge bash a previous owner or mechanic had put in the right side of the wiper motor cover and firewall in an attempt to get the valve cover out before. I took off the peeling blue paint, cleaned up the valve cover real well, and put red engine paint on it. Now it almost matches the "Firecracker Red" engine compartment. pax ------------------------ Yahoo! Groups Sponsor --------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/