[BaadAssGremlins] How Bart should 'fix a crack' .......
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] How Bart should 'fix a crack' .......



Bart - if you've a Model / Hobby Shop nearby -
check them for a good plastics glue.

This stuff essentially 'chemically melts' the plastic
- then 'cures' with air to a hardness.

Always do your repairs from Behind .

You can open a "V" along the crack line with a dremel
- from behind - making a trough or  "V" that
doesn't need to be deep - just a shallow "V".

Check the Front surface to get the alignment
perfect - then put a light bead of glue in the
'V' behind the crack & let cure .

You can go back and glue on a 'patch'
from behind - to strengthen that area
if it is to be flexed . 

Maybe some Fibre'Glas matt behind
the crack & some boat resin for the
stiffness.

Take some body filler after the part has
cured - 24hrs. - and should you want to
paint - run some across the crack line
to see if there are any voids.

Genlty smooth with XXXX steel wool 
as a polish - then paint with a semi-
gloss / flat matte finish .


As to the busted off part - 
you can get at the Hobby Shop
a "Rubber Mold Kit" - .

This will allow you to make an 
"Impression'' into a rubber material
that cures to a hardness - of the
shape that you want to duplicate.

As you know - the back is the front
when making impression molds - 
meaning - 

when you press the back of something
down into the mold material - you are
looking at the front on top.

Should you want a replication of the 
front side - be sure you find the correct
section from the rest of the grille to duplicate.

 - hit the Hobby sites from 
a Google search :

Making plastic part Molding material '
Rubber Molds
Making model parts from molds  
etc.

There is one book I bought that is still 
packed away - got it from that Car Book
Catalog - all about making small parts from
molds - it  should also show up in a Google 
Search - but a good Hobby Shop that deals
with Model Aircraft RC should have everything
you'll need to create plastic parts .


        Brien.
   NEW YORK




______

Message: 7         
   Date: Mon, 18 Oct 2004 2:12:00 -0400
   From: <badass73gremlin@xxxxxxxxxxxxx>
Subject: Doc or anyone on here,whats a good way to 
repair 
plastic?

one of the headlight buckets on my 76 Gremlin grill is 
cracked,Doc your
good with that kind of stuff,whats the best way to do 
that?also theres a
part that busted off the corner,is there a way i can 
make 
somthing to
replace that part? Any help would be greatly 
appreciated. Bart





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated