Re: [BaadAssGremlins] Re: horsepower

[<badass73gremlin@xxxxxxxxxxxxx>]

From: "unstable_74" <unstable_74@xxxxxxxxx>
Date: 2004/10/17 Sun PM 05:36:59 EDT
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: [BaadAssGremlins] Re: horsepower

Oh jeez my face is beat red now,i thought you were a buddy of mine ho goes by the name'Unstable Bob Gable'and ironiclly has a 74 Jav AMX and thought you were him,i am truly sorry for that <:)anyway welcome aboard Jeremy :)
Bart M.
Mod.BaadAssGremlins'


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Sorry I haven't been on much to read this. My name is Jeremy wright.
My motor is a 1978 360. It has been bored .060 the block has been 
decked .020 and the heads are angle milled, gasket matched with a 
basic valve job done with higher rate springs and new retainers and 
locks. The cam specs are 224 degrees intake/234degrees exhaust 
at .050 and .496/.521 right now I can't remember the lobe sep. We 
used stock replacement pistons to try to keep it some what close to 
legal for the type of racing that it is to be used for. I also used 
roades lifters and a true roller timing chain and balanced the 
engine. The intake is an edelbroek air-gap with a 750 holley and 
open headers.

Any guesses???
Thanks Jeremy





--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-
davis@xxxx> wrote:
> I got about 375 HP from a worn out 360 just with some ported 
heads, roller rockers, a good Isky cam, Torker intake, and cheap 
headman heders.
>  Davis 
> 
> unstable_74 <unstable_74@xxxx> wrote:
> 
> 
> I was wondering if anyone here could give me a relatively close 
> estimate of the horsepower a 360 would produce if I gave a list of 
> parts and machine work done?
> 
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links