Re: [BaadAssGremlins] Plastic Grill Repair & Plastic Parts In General

[Davis Martin <martin-davis@xxxxxxxxxxxxx>]

Doc,

 I am with ya on all that. I actually did back up all cracks and breaks and I have been putting gremlin's together for 20 years now I am sure I got the brackets and screws in properly.

 I have been looking at a couple of plastic welders on Ebay. the cost is about 140 bucks.

 

 Davis

AMC74HORNET@xxxxxxxxx wrote:

> Davis I always back up the parts I used the Plastic Weld System up with
> model sheet plastic or thin piece of 1/8" plexi glass and on occasion
> even used JB Weld on some parts. Street driving can be pretty rough too
> with all the bumps and pot holes. Eastwood sells a plastic welding kit
> but if I remember correctly it is a bit expensive. Also on grills you
> must make sure you have all the
>  screws and brackets installed properly.
> "Doc"
>
>
>
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/BaadAssGremlins/
>
> <*> To unsubscribe from this group, send an email to:
> BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
>
> <*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/

SPONSORED LINKS

Automotive maintenance

Automotive radiators

---

YAHOO! GROUPS LINKS

•  Visit your group "BaadAssGremlins" on the web.
   
•  To unsubscribe from this group, send an email to:
   BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---