Re: [AMC-list] Master cylinders

["Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>]

More on this master cylinder, I understand from the forums that this 
particular master does not have a deep enough hole in it for the pushrod 
coming from the brake booster. So I guess that one went down the tubes....

Armand


----- Original Message ----- 
From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, June 19, 2013 6:10 AM
Subject: [AMC-list] Master cylinders


> I'm on the forum also, I  was even welcomed there by a few fellow listers 
> here whom I've known for years. The forum is a great place too, and help 
> generally comes pretty quick. I'm just happy to have two sources of AMC 
> talk and information.
>
> Here's a link to an aluminum master cylinder from Speedway motors that I 
> got from reading the forums, what do you guys think of putting a GM styled 
> master into an AMC. The nice thing about this master is it's affordable, 
> (less than a new AMC master if you can find one) and it has the same side 
> hookup capability as the AMC masters. It's a one inch bore, I have a 
> Wilwood dics brake kit for front and rear, and a balancing valve already. 
> Just not sure I want to drop over $200 for a wilwood master too.
>
> http://www.speedwaymotors.com/Aluminum-Master-Cylinder-w-Stainless-Bore,50598.html
>
>
> Armand
>
>
>
>
> > I am on the AMC forum, but I like the list.  easier, especially in digest 
> > form.
> >
> > So many of you I have known on here, but never met, still I feel as if I 
> > know many of you.
> >
> >
> >
> > Hope to put a clutch in my '80 Concord wagon in the next few weeks.  Then 
> > I will finally get the answer as to how many splines  ETC on the imput 
> > shaft to the 4 speed, which I believe is an SR4..
> >
> >
> >
> > Would love to have a 2WD T5, without having to do the modify a Ford one, 
> > but if I remember right, there is only one hole in the bell housing that 
> > is slightly off??
> >
> > Somewhere I saved the e-mail with what was needed to do.
> >
> >  Anyone out there remember??
> >
> >  Jeff
> >
> > in Charleston.
>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com 

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com