Re: [AMC-list] vacuum actuator for amc snorkle

["Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>]

On the vacuum actuator, I needed to replace a frozen up one on my 88 Eagle a 
few years ago and it was found over counter at O'Reillys. I had to drill out 
the factory rivets on snorkle, and replace with screws but otherwise 
everything worked as should. And passed emissions also. I sprayed the little 
vent door down with some WD-40 also,. I don't remember what the parts house 
called it but it was not actuator, I took whole assembly up to them to check 
out was not problem matching it. Good luck,
Eddie Stakes
713-464-8825 days
www.planethoustonamx.com

From: gqrxzy8974@xxxxxxxx
To: amc-list@xxxxxxxxxxxxxxxxx
More progress, but still failure, but with some pictures.

http://amcgqr.comyr.com/trapdoor.html

Any idea what the diaphragm is made of (neoprene? silicon rubber?)
Any idea on what would really stick to the diaphragm?Any suggestions or 
souce of a *new* replacement diaphragm or vacuum actuator?


_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com