[AMC-list] Kahlid and the T5

[Jesse <j2sax@xxxxxxxxx>]

Forgive the spelling if I messed up your name.... wanted to get this out to you quickly and am behind on work! 

*Make sure you have a 79 up bellhousing.  
*Remove front bearing retainer (6 or so bolts on retainer that looks like it is holding in the input shaft)
* take front bearing retainer and bellhousing to machine shop 
*Tell them to make a good fit between the two (I always prefer to turn down the bearing retainer as they are a lot easier to find than AMC Bellhousings!)
*You will need to research the pilot bushing as I cannot remember (think it was for the Jeep T176?)  
*Bolt it up and prepare to trim as the shifter base sits back a little from AMC T5 or SR 4
*Make a simple adapter for trans mount

Drive IT! 

Jesse
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111205/e5156120/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com