Re: [AMC-list] 79 258 CTO

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

The CTO switches are usually on the driver side of the block under the 
intake/exhaust manifold. They are threaded into coolant passages in the block.  
There may be one or two of them.  Joe



----- Original Message ----
From: peggy delancey <butterfly15610@xxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Wed, August 17, 2011 7:37:23 AM
Subject: [AMC-list] 79 258 CTO

                          Hi Yall, Still haveing some issue with the 79 Pacer. 
While I was running new tranny cooler lines I accidently got them above the 
egine mount and knocked some Vac lines off! UGH! Anyway, The rubber hoses connct 
to metal tubing as well? It seems thesae would prolly go to the CTO, but I cant 
see or find it on the block? Anyone know where the location is on the 79 258?  I 
had plugged these hoses for now, but the car still does not idle well, I have to 
get them hooked back up! Any help is greatly apprecited!
 
 
                                                                                          
 Thanks,
 
                                                                                              
 Jay
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110817/ac79e9d1/attachment.htm>

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com