Re: [AMC-list] A couple questions

[Ken Ames <ameskg@xxxxxxxxx>]

Yes, the 11 and 25 are almost the same. There's an even smaller one that's
barely bigger than the o-ring and short too - Fram 3675 or equivalent. 

Ken


Quoting russ hathaway <russh97309@xxxxxxxxx>:

> I picked up a couple cases of Atlas oil filters, that cross reference to Fram
> PH-25. These are the filters used on 70s AMCs and since four of my rigs are
> 64-5 I need the Fram PH-11.
> I spun one filter on my 327 and it fit and the rubber lined up. Is the only
> diff between the PH 25 and 11 the length? Can this Atlas filter work on the
> 327 and 232s.
> Also, I have been searching for a 4v manny for my 327 and everyone wants an
> arm and a leg for one. I matched up a 327 intake gasket and a 360 gasket and
> they are both really close. I seem to remember hearing at one time that a
> second gen manifold will fit a 327 with minor alterations. Anyone know for
> sure? I can get a stock 4V from a 360 for about $10 so I don't mind messing
> with it for an afternoon to get it to fit......Russ
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110620/f96bc171/attachment.htm>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> 


_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com