Re: [AMC-list] 232 Carb Spacer?

[Marc Montoni <Freedom@xxxxxxxx>]

Keith Evenson <epd@xxxxxxxxxxxx> said:


>>So I am working on a 66 Rambler with a 6 cyl and under the 2V carb is 
>>about a 1/2 " spacer that has a hose connected to the corner. The one 
>>on the car looks like it used to have a nipple on it but it is broken 
>>off. Can anyone tell me what it is called, what it does and where I 
>>can get one that does not have the nipple broken off? 


I believe you're referring to the PCV port.

Although this is a one-bbl setup, you might find the photos in this forum thread useful:

http://theamcforum.com/forum/232-carburetor-interchanges_topic24964.html

I used to have a couple laying around but I believe I trashed them in a fit of cleaning up.

Although that spacer is bakelite, you might be able to drill it out for a good adhesion surface and tap it for a fitting with the help of some epoxy.

You might also check with the AMC hobby vendors:

http://www.planethoustonamx.com/AMC_Vendors/amc_vendors.htm

I'd bet this is one of those things that's readily available.

-- Marc

P.S.  If you haven't joined already, it will help you immensely to be a member of one of the AMC clubs:

        http://www.AMCRC.com
        http://www.AMONational.com

If you'd like a sample newsletter from each, reply to me directly via <Rambler@xxxxxxxxx> or click <mailto:Rambler@xxxxxxxxx?Subject=AMC_Clubs> with your name, address, phone, & email, and I'll send you one.



_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com