Re: [AMC-list] How stablize 63 Classic rear end

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

Somehow Ramblers and bailing wire just seem to go together.
 
Joe Fulton

--- On Mon, 8/9/10, russ hathaway <russh97309@xxxxxxxxx> wrote:


From: russ hathaway <russh97309@xxxxxxxxx>
Subject: Re: [AMC-list] How stablize 63 Classic rear end
To: "Rambler Nash Jeep and familyAMC" <amc-list@xxxxxxxxxxxx>
Date: Monday, August 9, 2010, 7:18 AM


When I had the tranny out of a TT Rambler I got a long 1x6 board. I cut it to width, bolted onto the Xmember holes and with the TT resting on the board tied it good and tight with baling wire. It was solid as can be and I could roll it around the drive.......Russ


      
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100809/44123b65/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com