This has been a subject in the past, wish I had the information as to who did the test. The results are quite interesting. Armand > For all of you that are mechanically inclined..... > > Penetrating Oils Compared > > Machinist's Workshop magazine actually tested penetrates for break out > torque on rusted nuts. Significant results! They arranged a subjective test > of all the popular penetrates with the control being the torque required to > remove the nut from a "scientifically rusted" environment. > > Penetrating oil ..... Average load > > None ..................... 516 pounds > > WD-40 .................. 238 pounds > > PB Blaster ..............214 pounds > > Liquid Wrench ...... 127 pounds > > Kano Kroil ............ 106 pounds > > ATF-Acetone mix... 53 pounds > > The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic transmission > fluid and acetone. > > Note the "home brew" was better than any commercial product in this one > particular test. A local machinist group mixed up a batch and all now use it > with equally good results. Note also that "Liquid Wrench" is about as good > as "Kroil" for about 20% of the price. > -------------------------------------------------------------------------------- The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. Get busy. = -------------------------------------------------------------------------------- Internal Virus Database is out-of-date. Checked by AVG. Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date: 5/15/09 6:16 AM -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100412/ce35a433/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com