Re: [AMC-list] More Electrical

[Ken Ames <ameskg@xxxxxxxxx>]

At first glance this looks like the dash voltage regulator is working as it
should. The on-and-off puts an average 5 or so volts to the gauges which is
correct, AFAIK.

Ken


Quoting feltonjk@xxxxxxx:

> More in my continuing saga of restoration of my 70 AMX.  Just got my gauges
> back from the shop, all gauges (temp/fuel) all lights, circuit board etc.
> have been checked and verified to be working.  New fuel sending unit
> installed a couple of years ago.  The sending unit is grounded to clean bare
> metal.  I thought I put in a new temp sending unit but am not 100% sure. 
> When I put a check light on the temp sending unit wire and on the fuel
> sending unit wire, the check light lights up indicating power through the
> harness to the connectors, but the test light blinks like a signal light!  It
> would appear as if I did something wrong somewhere along the way.  Have any
> of you run into this?  Help!!!!
> 
> 
> Jim
> 
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100313/1d4d1b41/attachment.htm>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> 


_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com