answers in the text. -- Mark Price Morgantown, WV 1969 AMC Rambler, 4.0L, EFI, T-5 2004 Grand Cherokee Laredo, 4.7L, Quadratrac II " I realize that death is inevitable. I just don't want to be around when it happens! " -------------- Original message ---------------------- From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx> > A million thanks Tom, > > I am pretty sure I will be relying heavily on you, Tom, and several others > on this list once I really get into this > A/C install. I understand the concept of how A/C works and all, I've just > never really messed with it in the past. > > Now I'm wondering (because Ramble Mentality has set in) how much of the > cleaning and rebuilding of the components > I can do myself. > > Please interject answers between these questions. And this is open to anyone > who can help. > > > > 1. What cleaner or solvent should be used? Would CRC Brake Clean work? Brake clean will work. A friend who works on household A/C and heatpumps mentioned a chemical they use. You spray it on, let it soak, then house it off. It removes the fine layer of deteriorated aluminum to allow better heat transfer. I don't have name for it as he never came through and gave me some! try a household A/C shop or supply place for it. I'd use a product made by "Star Brite" called Toon Brite if I could not find anything else. It cleans the grime off of pontoons on pontoon boats quite well. No scrubbing at all. > > > 2. If I flush out the interior of the condenser and evaporator coils with > the appropriate cleaner/solvent, > What should I use to clean the exterior of these coils. I need to remove > the old finish (black paint), > straighten the fins between the tubes, and then repaint the condenser > coil with what kind of paint? I'd use the above products, painting would be done with standard Radiator paint if at all. I know you show your car, but and, I would investigate the possibility of replacing the condensor with the largest new condensor that would fit the space well. You'll get better cooling form some of the new designs made for R-134a. Tha being said, The stock will work fine in most cases. Paint is actually for looks only and slows heat transfer. So I'd only paint if it needs it to look good. > > > 3. What would you suggest I use in and around the heater core box and the > A/C box to insure that there > is no residual mousy smell? ( fricken mice, stick the heck out of > everything good) Seal the tubes super well. Send the wife or S.O to the movies, toss it in the dishwasher on pots and pans cycle with one of those electrosol type tables instead of regular dishwasher detergent! Thos etabs are amazing, they clean layers of curd out of stainless Thermos with zero effort and scrubbing! Should demousifiy the evap pretty well. There is also a chemical available from GM dealers they use. maybe get it to pretreat before final assembly too. > > > 4. Have any of you ever had one of these heater core or A/C boxes completely > disassembled right down to > removing the little rivets? Where did you find matching or nearly > matching rivets and what tool did you set the > new rivets with? Go back to Mattsoldcars!!! He has all that info! and he even has some of the stuff he'll send you as he bought in bulk to do his! He's a truly great guy! > > Thanks for the help, > > Armand > > > > > > Tom wrote...... > > > > A brain fart prevents me from remembering the name of the stuff, but you > > can buy it at auto A/C places like ACsource.com. It comes as a thick > > tape with a plastic backing you peel off. > > > > It's good around irregular shapes like expansion valves etc. > > > > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list