Thanks :) Ken Quoting "(Sandwich Maker)" <adh@xxxxxxxxxxxxxxxxx>: > > " From: Ken Ames <ameskg@xxxxxxxxx> > " > " Quoting "(Sandwich Maker)" <adh@xxxxxxxxxxxxxxxxx>: > " > " > " From: Brien Tourville <hh7x@xxxxxxxxxxxxx> > " > " > " > " > " > " Not very far - looks like the clutch slave > " > " on my '89 Cherokee is failing.. half pedal > " > " with free swing. > " > " > " > " Now to find if it's external or the transmission > " > " has to come out. > " > > " > it's internal. dunno if they'd gone to the ax15 by then, but if so it > " > might be worth scavenging the later external-slave bell ['94?-up] > " > while you're doing the job. > " > " > " Of course you have checked the fluid level. > > and tried pumping it to see if piston seals are going. > > " Is the rod between the slave cylinder and the throwout arm > " adjustable? I don't have a later Jeep to be able to check. > > the internal-slave doesn't have a rod; the slave cylinder is combined > with the throwout bearing and presses directly on the pressure plate. > ________________________________________________________________________ > Andrew Hay the genius nature > internet rambler is to see what all have seen > adh@xxxxxxxxxxxxxxxxx and think what none thought > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list > _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list