Re: [Amc-list] SR-4/T-4/T-5 in an American BINGO!

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Tom Jennings <tomj@xxxxxxx>
" 
" 
" The T-5 to Ford T-96 adapter will perfectly fit the center hole
" on the Rambler T-96 bellhousing -- and at least the top two
" bolts are in exactly the right place. The lower passenger-side
" may be exactly correct, also, but the drivers side lower bolt
" is lower on the Ford trans, so either the adapter or the bell
" would need redrilling there.  That's a non-critical dimension.

i wonder if they could be persuaded to make a rambler model, drilling
the 4 lower holes to accomodate both the early 4-point and later 
tranny-mount bells.  group buy?

it'd work for studebaker too...

" The adapter is 5/8" thick. I still have to add up all the
" thicknesses and shaft lengths.

my speculation - '94-up mustang v6/v8 t5s.  based on the multipattern
bell taking both the t14 [t96] and amc t5, which has the same input
length as '93-earlier ford t5s, you'd need the extra 2/3" input length.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list