Tom, Try your local rent all center, give them a call, they may "rent" a 1-3/4 inch socket and giant 3/4 or inch drive breaker bar. You need a king daddy torque wrench any way to re-torque this stuff. Better yet if you know a guy that works for a Chrysler Jeep dealer..........they had to mess with this stuff all the time..... When I was concerned about the "torque" on my nuts (he he he) (quit laughing you guys) I asked my buddy who works for a Chrysler Jeep dealer, he came over with a 1-3/4 inch socket and a king daddy torque wrench. We broke the nuts loose and re-torqued them to about 275 ft lbs. in about ten minutes. A big socket works much better than the wrench. You'll thank yourself for not busting up your knuckles. Armand ----- Original Message ----- From: "Tom Jennings" <tomj@xxxxxxx> To: "AMC List" <amc-list@xxxxxxxxxxxx> Sent: Friday, March 28, 2008 1:32 AM Subject: [Amc-list] big a** wrenches > So I'm just gonna buy a pair of 1-3/4" wrenches. No sense > avoiding, or being afraid of, working on big-nut rears, or > using junk solutions. > > So "real" wrenches (SK or better) are like $100. Crap wrenches > are as low as $12 (!!!). > > Since these are low-use, but high torque, I'm thinking of > buying some middling non-brand that at least claims to be > vanadium steel, drop forged. (The cheap ones say "fully > polished!" (great!) "carbon steel" (umm, great?) or nothing > at all... I figure if they go out on a limb and utter a known > alloy steel there's a slight chance it won't bend into a "Y" > with 300 ft/lbs. > > The middling ones run $25 - $35 each. Sound about right? > > What a morass this cheapest-cheap-crap-I-can-get-walmart > world is. > > Snap-On is like $200 each, if you want a benchmark :-) > > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list > > > > -- > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.519 / Virus Database: 269.22.1/1347 - Release Date: 3/27/08 7:15 PM > > _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list