Re: [Amc-list] Stupid Question: what size open end for drain plug?

[Wrambler242@xxxxxxxxxxx]

I actually have a grade 8 flywheel bolt in mine with a copper washer :]
The thread was right and my original bolt was trashed from years of abuse with crescent wrenches.
I never use a crescent wrench on an oil pan drain.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrc II
" Chronic Pain Hurts"

 -------------- Original message ----------------------
From: Glen Hoag <hoag@xxxxxx>
> I believe that all 199/232/258 use a 3/4" wrench.
> 
> --Glen
> 
> At 08:43 PM 2/19/2008, you wrote:
> >Glad it worked, I ran into the same situation with my 1964 
> >Classic.  I believe that the drain plug size was changed in 1965 as 
> >my 1965 American has a smaller drain plug, and the car is/was all 
> >original when I acquired it.
> >
> >   Again, glad it worked out.
> >
> >   Bill
> >
> >Bruce Griffis <bruce.griffis@xxxxxxxxx> wrote:
> >   Thanks. That did the trick. The drainplug is a little rounded, so 
> > I figured I'd better ask.
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list