Re: [Amc-list] front spindle info

[Tom Jennings <tomj@xxxxxxx>]

On Sun, 3 Feb 2008, Matt Haas wrote:

> * To identify six cylinder heavy duty drum brakes, measure the length of
> the spindle bolts. Normal duty brakes have spindle bolts that are 2-1/8"
> and 3-1/4", heavy duty are 2-1/2" and 3-5/8".

AArgh! OK, so while there's sense to what setup got tall spindles vs.
short, it's of no practical use :-)


> Part numbers are the same left and right which is good `cause if it
> wasn't that way, it would probably make your head explode.

Too late for that!

Thanks for the headache-inducing data! :-)
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list