If the threads are finer, you could do worse than use a length of 3/4" pipe as the starting point for making a tool, since the outside diameter is so close to 1". --Glen At 11:44 AM 1/28/2008, you wrote: >On Sun, 27 Jan 2008, Glen Hoag wrote: > > > I just had a peek into the '61 American TSM and looked at the > > steering wheel puller. The tool shown there, J-5290, looks like it's > > about 3" long or so, and might be nothing more than a 3/4" pipe > > nipple with a nut welded into the top end. There appears to be a > > taper on the business end. > > >I'll get a piece and see if that's true; the threads look finer >than that but it's a cheap enoguh test and would save a bunch >of hassle! >_______________________________________________ >Amc-list mailing list >Amc-list@xxxxxxxxxxxx >http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list