Re: [Amc-list] Removing front drums - leave bearing nuts alone? Just remove dus

[Glen Hoag <hoag@xxxxxx>]

Exactly.  If you need to replace the front drums, you will have to 
press the wheel studs out (or have it done at a machine shop).  This 
used to be a common task.

--Glen

At 04:58 PM 1/22/2008, you wrote:
>I think I found the answer from a previous post (to me). Happy for 
>the search feature!
>
>Quote: The fronts should be less difficult to get off. All you have to do for
>the fronts is take the wheel bearings a part. The front drums are held
>onto the hubs by the wheel studs. /Endquote

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list