[Amc-list] fwd: [strokers] ROLLER CAMSHAFT - ROLLER LIFTERS >4.0<

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

anyone here interested in a hydro roller cam for the six?  tom, your
indy motor?  this is designed to work with crane #86532 amc v8 lifters
with slightly modified tiebars.

it's steep, but if you want the very best performance...

'joe' is at roto-faze, but flash is coordinating the order.  he's
oriented around the 4.0, but of course the cam also fits all
199/232/258.

" From: "flashgordon_62" <flashgordon_62@xxxxxxxxx>
" 
" OK you have your info below and i just got off the phone with 
" joe...........we must have 6 cam ordered before he will start on the 
" Roller Cam Blanks, so tell every on you know!
" 
" The price from Joe is: $485.25 for the cam blank.
" 
" We have all the info now.  it's time the tell the world and see what 
" happen. lets keep the count here, but tell every one you know
" I will throw it at NAXJA and see how it land. any one that has ties 
" with the other jeep clubs, AMC club Please let them Know. Remember 
" this cam will also fit a 258...... and probably some of the other AMC 
" in-line six's 
" 
" 
" >                THE LAST TIME I TALKED TO JOE!!!!
" > 
" > 
" >  I asked him who he would recommend for the cam grinder for our Hyd 
" > Roller Cam.
" > 
" > He recommended (2) shops, that he uses, Both shop, he has used a lot 
" > for custom cam grinds.
" > 
" > The first place that he recommended is in California.
" > 
" > "SCHNEIDER CAMS" There # IS 619-297-0227, Take to Jerry.  I did, 'Cam 
" > grind" of any profile (said he had probably one of the most roller 
" > profiles cataloge.............Price.............$450
" > He said he could get the roller cam lifter that were will need(V8 
" > roller AMC) but didn't have a price, said that he had, or could make 
" > any length of push rods for us.
" > 
" > If you live more toward the East coast(Florida)Then Crane was his 
" > recommended cam grind shop.
" > 
" > Crane cam's, talk to Chase Night at 386-252-1151 ext.#402
" > 
" > Cam Grind $468.00, (any profile) Chrome molly push rods $80.00, V8 
" > Hyd Roller lifters ( set of 12)...Chase said that he would give us 
" > the good guy discount $337.00.
" > 
" > And when we get this far, plan on a 4-6 week proses. Apparently there 
" > is a vary long heat treatment proses for the roller cams
" > 
" > Flash.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list