Re: [Amc-list] Rears

[Wrambler242@xxxxxxxxxxx]

Thats a good point, but in reality if you were fitting large tires you would want both measurements to be sure of allowing enough room for clearance.
  I figured the 1/2" wasn't worth squabbling about. Only 1/4" per side. I will figure out the necesary stuff when I get one in hand. 

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5

 -------------- Original message ----------------------
From: "Jim Blair" <carnuck@xxxxxxxxxxx>
> A: Ever notice how you can push/pull the axles slightly? This can also 
> account for differences (and worn wheel bearings would throw it off too) I 
> use pieces of steel angle iron drilled to fit over the studs and measure 
> between them.
> 
> 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list