Re: [Amc-list] Pushrod installation on 232 engine

[Tom Jennings <tomj@xxxxxxx>]

On Sat, 7 Apr 2007, Jay wrote:

> I had a valve job done on the head and have it re-installed partly. the head
> is on but I am in a quandary as to the best (and easiest) way to re-install
> the pushrods.  If I had a tool to depress each valve spring, perhaps I could
> do it. if I take the rocker assy. off AI probably will not be able to screw
> it back on due to the valve spring tension.

Get a 3/4" big wrench or socket and rotate the motor so's the
valves you want to assemble are both closed. Then bolt the
rockers down. The motor's easy enough to turn with all the
plugs out.


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list