[Amc-list] wanted: 1967 232 six cylinder bellhousing shim plate (not me)

["Jim Blair" <carnuck@xxxxxxxxxxx>]

1967 232 six cylinder bellhousing shim plate HELP!!!
   Posted by: "Rick" my67j3000@xxxxxxxxx my67j3000
   Date: Tue Mar 6, 2007 9:37 am ((PST))

Allright I going to ask for your HELP one more time. I am
rebuilding a
1967 J3000 pickup & I need a bellhousing shim plate for 232 six
cylinder. I got this truck in a basket & there were a few parts
missing in the drive train, I have found most of what I need but
I am
still missing the shim plate. The newer 232s & 258s shim plates
will
not work on this engine because the bell housing is smaller than
the
new ones. I could really use an original one but I could fab one
myself if I knew what the relative thickness was. So if one of
you
other JEEP NUTS out there could help a guy out it would really
be
helpfull. GIVE IT UP GUYS & HELP ME OUT I WOULD LIKE TO GET THIS
THING
BACK TOGETHER. THANKS & KEEP IT OFF THE ROAD.

_________________________________________________________________
Find a local pizza place, movie theater, and more?.then map the best route! 
http://maps.live.com/?icid=hmtag1&FORM=MGAC01

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list