[AMC-List] Door Twisting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[AMC-List] Door Twisting
- From: "Neil Shaw" <n.shaw@xxxxxxxxxxxxx>
- Date: Fri, 10 Nov 2006 08:02:23 -0600
Can a door that is not lining up at the latch end be twisted into alignment? The drivers door on the Javelin lines up good at the hinge end but is about 1/4" in at the top and 1/4" out at the bottom at the latch (rear) end of the door. (So if you line up the top edge correctly, the bottom is out 1/2".) All the other body panels line up well.
Thanks,
Neil Shaw
'72 Javelin SST
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list
or go to http://www.amc-list.com
Back to the Home of the AMC Gremlin